week 2 advertising
.jpeg)
.jpeg)
.jpeg)
%20(1).jpeg)
final project: seismic isolation structure, how does it work?
Severe earthquakes often result in significant damage to buildings, infrastructures, and cause casualties. For example, the 2011 Tohoku Earthquake in Japan caused over 20,000 deaths and missing, and 190,000 buildings were damaged (Okada et al., 2011; Takewaki et al., 2011). Protecting building structures under earthquakes is of great concern in earthquake-prone countries (Mazzolani, 2001; Azinovic et al., 2016; Tesfamariam, 2022; Zhang et al., 2022). To address this challenge, building isolation systems are applied to mitigate seismic hazards (Morgan, 2007; Mohammed and Mohd, 2011; Takewaki et al., 2013). The aim of applying building isolation is to reduce either the storey or inter-storey vibrations transmitted from the seismic ground motions (Hu, 2014). In practice, two types of passive building isolation systems are commonly used, which are the base isolation system (Jangid and Datta, 1995; Deb, 2004) and the super-structure isolation s...
Not enough work completed. Please refert to my pervous email, which outlines all the work that you need to complete and examples of how you can complete this work.
ReplyDeleteWeek 2 Advertising
Part 1 blog post Research
On your blog post for week 2 Advertising, show an advert that you consider to be a good example of advertising, then discuss the following:
1. What makes good design?
2. What is typography ?
3. Research An advert / or a designer – See example below
4. Advert design and layout – See example below
5. Using text and image in advertising – See example below
6. What is a Tagline
7. What is a Logo
8. The message in advertising
9. Methods of getting your attention in advertising
10. Reaching a Target Audience in advertising
Part 2: Create a blog post to show the amazing work that you created in class – Pixlr and Adobe express.
Here you will need to write about your work, for example,
• why you chose the Advert design and layout – see example below
• why you chose the text and image
• What is the message in advertising
• Who is the target audience – see example below
Part 3:
For one of your adverts. Create a blog post to demonstrate how you have used the software, in either Pixlr or Adobe express. Here you will need to show screen shots of how you create your work